Happymodel Mobula7 Mobula 7 1S 75mm Micro FPV Whoop RC FPV Racing Drone with 5.8G Openvtx 400mW VTX Caddx Ant Camera RS0802

Happymodel Mobula7 Mobula 7 1S 75mm Micro FPV Whoop RC FPV Racing Drone with 5.8G Openvtx 400mW VTX Caddx Ant Camera RS0802

298.50$ – 304.50$

SKU: 3256808369913999 Category:

Description

  • Hign-concerned Chemical: None
  • Max Wind Speed Resistance: <10km/h
  • Max Takeoff Weight: <1kg
  • Equipped with Aerosol Spraing System/Spread Tank Volume: No
  • Video Maximum Resolution[Pixel X Pixel]: 1080i/P（1920*1080）
  • Category: Camera drone
  • Aircraf Operating Frequency: 2.4GHz
  • Drone Weight: 24G (without battery)
  • GPS: No
  • Connectivity: APP Controller
  • Flight Time: 12min
  • Sensor Size: None
  • Camera Integration: Camera Included
  • Camera Features: 1080p HD Video Recording,720p HD Video Recording
  • Brand Name: DJIRCTOY
  • Origin: Mainland China
  • Aerial Photography: Yes
Due to Runcam Nano3 camera was discontinued, now the Mobula7 1s comes with Caddx ant camera since May 2024. The Mobula7 1s with Caddx ant camera we called V2 version. Please noticed .

New Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season.

The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller.

The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable.

New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event.

Features:
X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and Openvtx
VTX Power up to 400mw
ELRS V2.0 Support
NEW RS0802 KV20000 motors
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Recommend 1S 450mah/550mah/650mah battery(Not include)

Specifications:
Brand Name: Happymodel
Item Name: Mobula7 1S 75mm Micro FPV whoop drone
Wheelbase: 75mm
Size: 99mm*99mm*40mm
Weight: 24g

Receiver option:
2.4G ELRS SPI
SPI Frsky D8/D16 not compatible with EMAX E6 radio
PNP (without onboard receiver)
TBS version(with external TBS CRSF NANO RX)

Package includes:

Item Name

Qty

Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)

1

Option1: X12 ELRS V1.0 flight controller built-in SPI ELRS 2.4G receiver

1

Option2: X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver

Option3: X12 PNP V1.0 flight controller with External TBS NANO receiver

Option4: X12 PNP V1.0 flight controller without onboard receiver

RS0802 KV20000 brushless motor

4

Gemfan 1610-2 bi-blade propellers(4cw+4ccw)

1

Runcam Nano3 1/3 CMOS 800TVL camera

1

Onboard 5.8G Openvtx 0mw~400mw VTX

1

1S parallel charging board

1

Propeller disassemble tool

1

Extra camera canopy

1

Spare parts specifications:

PNP Version

(without onboard receiver)

Full UART1 for external Receiver
Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
IR1 pad(invert RX1) used for SBUS input

Motor

Mode: RS0802 KV20000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm
Weight(g):2.0g
No.of Cells(Lipo):1S only

Propellers

Weight:0.24g
Material:PC
Pitch:1 inchProps Dia:40mm
Center Thickness:5mm
Center Hole Dia:1.5mm

Flight controller

X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
X12 PNP V1.0 flight controller with external TBS CRSF Nano receiver Target: CRAZYBEEF4DX
X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage detection
Built-in current sensor

Onboard 4in1 ESC

Power supply: 1S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200

Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware

Onboard Frsky SPI D8/D16 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support

Onboard 5.8g OPENVTX

Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v):650ma~1000ma

Runcam Nano3

Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 150°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

Reviews

There are no reviews yet.

Be the first to review “Happymodel Mobula7 Mobula 7 1S 75mm Micro FPV Whoop RC FPV Racing Drone with 5.8G Openvtx 400mW VTX Caddx Ant Camera RS0802”

Your email address will not be published. Required fields are marked *

Related products